INSTALLATION AND OPERATING MANUAL Translation of the original manual Keep for future use! This operating manual must be strictly observed before tra
Series MNKA, acc. to ASME Page 10 9250-050-en Revision 11 TM 7903 Edition 07/2010 4 Product description The housing (casing) dimensions, nominal
Series MNKA, acc. to ASME Page 11 9250-050-en Revision 11 TM 7903 Edition 07/2010 A distance depending on the coupling used is to be observed
Series MNKA, acc. to ASME Page 12 9250-050-en Revision 11 TM 7903 Edition 07/2010 5.4.6 Venting and draining Venting can take place into the di
Series MNKA, acc. to ASME Page 13 9250-050-en Revision 11 TM 7903 Edition 07/2010 5.8 Coupling If one coupling half engages with the other, the
Series MNKA, acc. to ASME Page 14 9250-050-en Revision 11 TM 7903 Edition 07/2010 6 Commissioning/Shutdown 6.1 Initial commissioning Normally, t
Series MNKA, acc. to ASME Page 15 9250-050-en Revision 11 TM 7903 Edition 07/2010 6.3 Shutdown Close discharge valve down to the position &quo
Series MNKA, acc. to ASME Page 16 9250-050-en Revision 11 TM 7903 Edition 07/2010 7 Maintenance 7.1 Screw connections of the housing (casing) A
Series MNKA, acc. to ASME Page 17 9250-050-en Revision 11 TM 7903 Edition 07/2010 7.5 Notes on dismantling All repair and maintenance work is
Series MNKA, acc. to ASME Page 18 9250-050-en Revision 11 TM 7903 Edition 07/2010 Both radial ball bearings lie against the shaft collar, so r
Series MNKA, acc. to ASME Page 19 9250-050-en Revision 11 TM 7903 Edition 07/2010 7.8 Assembly 7.8.1 Assembly of the bearing pedestal, long
Series MNKA, acc. to ASME Page 2 9250-050-en Revision 11 TM 7903 Edition 07/2010 List of Contents List of Contents ...
Series MNKA, acc. to ASME Page 20 9250-050-en Revision 11 TM 7903 Edition 07/2010 7.8.7 Final assembly Dismantle trial assembly for determining
Series MNKA, acc. to ASME Page 21 9250-050-en Revision 11 TM 7903 Edition 07/2010 8 Faults Faults may result from inadmissible modes of operatio
Series MNKA, acc. to ASME Page 22 9250-050-en Revision 11 TM 7903 Edition 07/2010 9 Sectional drawing 9.1 Legend100 housing (casing) 122 bl
Series MNKA, acc. to ASME Page 23 9250-050-en Revision 11 TM 7903 Edition 07/2010 9.2 MNKA with long life grease lubrication
Series MNKA, acc. to ASME Page 24 9250-050-en Revision 11 TM 7903 Edition 07/2010 9.3 MNKA with oil bath lubrication
Modification techniques sans préavis, réservées!Graphique non à l'échelle!Dimensions valables uniquement revêtues d'une signature!This leafl
Richter Chemie-Technik GmbH Otto-Schott-Straße 2 D-47906 Kempen www.richter-ct.com Erstellt/Compiled: CRM/GK am/on: 01.03.2010 Seite/Page : 1 Q
Richter Chemie-Technik GmbH Otto-Schott-Straße 2 D-47906 Kempen www.richter-ct.com Erstellt/Compiled: CRM/GK am/on: 01.07.2010 Seite/Page : 1 QM-
Prepared: CRQ/Lam on: Feb. 15, 06 Page: 1 QM No.: 0912-16-2001_en/4-06 Approved: CRQ/Zu on: Feb. 15, 06 of : 2Safety Information / Declaration
Declaration about the Contamination of Richter Pumps, -Valves and Components Prepared: CRQ/Lam on: Feb. 15, 06 Page: 2 QM No.: 0912-16-2001_en/4-
Series MNKA, acc. to ASME Page 3 9250-050-en Revision 11 TM 7903 Edition 07/2010 Relevant documents Data sheet Works certificate Sectio
Landesbank Rheinland-Pfalz, Mainz Kto. 110 145810 (BLZ 550 500 00) SWIFT: MALA DE 555 50 USt. Id. Nr. DE 811 127054 Sitz der Gesellschaft: Kempen
Series MNKA, acc. to ASME Page 4 9250-050-en Revision 11 TM 7903 Edition 07/2010 Noise capacity level : LWA = Q 70 dB acc. to DIN EN ISO 9614-
Series MNKA, acc. to ASME Page 5 9250-050-en Revision 11 TM 7903 Edition 07/2010 2 Notes on safety This operating manual contains fundamental in
Series MNKA, acc. to ASME Page 6 9250-050-en Revision 11 TM 7903 Edition 07/2010 In the event of operating conditions other than those described
Series MNKA, acc. to ASME Page 7 9250-050-en Revision 11 TM 7903 Edition 07/2010 For safe pump operation, we recommend a flow rate of 0.3 to 1.1
Series MNKA, acc. to ASME Page 8 9250-050-en Revision 11 TM 7903 Edition 07/2010 During operation of the pump it must be ensured that excessive
Series MNKA, acc. to ASME Page 9 9250-050-en Revision 11 TM 7903 Edition 07/2010 3 Transport and storage The pump or the unit must be transporte
Comments to this Manuals