INSTALLATION AND OPERATING MANUAL Translation of the original manual Keep for future use! This operating manual must be strictly observed before tra
Series RMI Page 10 9470-050-en Revision 00 TM 7978 Edition 08/2010 4 Product descriptionThe housing dimensions, nominal ratings and technical re
Series RMI Page 11 9470-050-en Revision 00 TM 7978 Edition 08/2010 5 Installation5.1 Safety regulations Equipment which is operated in potential
Series RMI Page 12 9470-050-en Revision 00 TM 7978 Edition 08/2010 The NPSHR available in the plant should be at least 1,64 ft (0,5 m) higher th
Series RMI Page 13 9470-050-en Revision 00 TM 7978 Edition 08/2010 5.6 Monitoring facilities Appropriate monitoring facilities are to be recomme
Series RMI Page 14 9470-050-en Revision 00 TM 7978 Edition 08/2010 6 Commissioning/Shutdown 6.1 Initial commissioning Normally, the pumps have a
Series RMI Page 15 9470-050-en Revision 00 TM 7978 Edition 08/2010 6.3 Shutdown Close discharge valve down to the position "minimum flow
Series RMI Page 16 9470-050-en Revision 00 TM 7978 Edition 08/2010 7 Maintenance 7.1 Safety-relevant screw fittings After initial loading by the
Series RMI Page 17 9470-050-en Revision 00 TM 7978 Edition 08/2010 7.4 Stand-by pumps If a pump is on stand-by, it is to be started up from time
Series RMI Page 18 9470-050-en Revision 00 TM 7978 Edition 08/2010 7.6.2 Dismantling of drive unit long life grease lubrication Undo hex. s
Series RMI Page 19 9470-050-en Revision 00 TM 7978 Edition 08/2010 7.7 Notes on assembly Use original spare parts. See also Chapter 2.4. Do
Series RMI Page 2 9470-050-en Revision 00 TM 7978 Edition 08/2010 List of Contents List of Contents ... 2
Series RMI Page 20 9470-050-en Revision 00 TM 7978 Edition 08/2010 Press the bearing bush 545/1 into the impeller 230 together with the anti-t
Series RMI Page 21 9470-050-en Revision 00 TM 7978 Edition 08/2010 7.8.5 Final assembly Deposit the housing 100 on a workbench, for example, wi
Series RMI Page 22 9470-050-en Revision 00 TM 7978 Edition 08/2010 8 Malfunctions Faults may result from inadmissible modes of operation. Improp
Series RMI Page 23 9470-050-en Revision 00 TM 7978 Edition 08/2010 9 Sectional drawings 9.1 Legend100 casing (housing) 122 blind cover 158 con
Series RMI Page 24 9470-050-en Revision 00 TM 7978 Edition 08/2010 9.2 Long life grease lubrication
Series RMI Page 25 9470-050-en Revision 00 TM 7978 Edition 08/2010 9.3 Oil bath lubrication
Series RMI Page 26 9470-050-en Revision 00 TM 7978 Edition 08/2010 10 Assembly aids 10.1 Boring template for housing drain Pump size Ident. N
Modification techniques possibles sans réservées! Graphique non à l'échelle! Dimensions valables uniquement revêtues d'une signature! This l
Modification techniques possibles sans réservées! Graphique non à l'échelle! Dimensions valables uniquement revêtues d'une signature! This l
Richter Chemie-Technik GmbH Otto-Schott-Straße 2 D-47906 Kempen www.richter-ct.com Erstellt/Compiled: CRM/GK am/on: 01.03.2010 Seite/Page: 1 QM
Series RMI Page 3 9470-050-en Revision 00 TM 7978 Edition 08/2010 Relevant documents Data sheet Works certificate Sectional drawing RMI
Richter Chemie-Technik GmbH Otto-Schott-Straße 2 D-47906 Kempen www.richter-ct.com Erstellt/Compiled: CRM/GK am/on: 01.07.2010 Seite/Page : 1 QM-
Prepared: CRQ/Lam on: Feb. 15, 06 Page: 1 QM No.: 0912-16-2001_en/4-06 Approved: CRQ/Zu on: Feb. 15, 06 of : 2Safety Information / Declaration
Declaration about the Contamination of Richter Pumps, -Valves and Components Prepared: CRQ/Lam on: Feb. 15, 06 Page: 2 QM No.: 0912-16-2001_en/4-
Landesbank Rheinland-Pfalz, Mainz Kto. 110 145810 (BLZ 550 500 00) SWIFT: MALA DE 555 50 USt. Id. Nr. DE 811 127054 Sitz der Gesellschaft: Kempen
Series RMI Page 4 9470-050-en Revision 00 TM 7978 Edition 08/2010 1.1 Tightening torques Screws greased, tighten in diametrically opposite seque
Series RMI Page 5 9470-050-en Revision 00 TM 7978 Edition 08/2010 2 Safety This operating manual contains fundamental information which is to be
Series RMI Page 6 9470-050-en Revision 00 TM 7978 Edition 08/2010 Observe the instructions contained in the operating manual or contractual docu
Series RMI Page 7 9470-050-en Revision 00 TM 7978 Edition 08/2010 2.6.2 Special operating conditions In the standard design the can chamber and
Series RMI Page 8 9470-050-en Revision 00 TM 7978 Edition 08/2010 2.6.7 Temperature limits In the normal operating condition the highest tempera
Series RMI Page 9 9470-050-en Revision 00 TM 7978 Edition 08/2010 3 Transport, storage and disposalThe pump or the unit must be transported prop
Comments to this Manuals